Chiral Molecules Research Articles

Carbene-Catalyzed Atroposelective Construction of Chiral Diaryl Ethers.

Atropoisomeric chemotypes of diaryl ethers-related scaffolds are prevalent in naturally active compounds. Nevertheless, there remains considerable research to be carried out on the catalytic asymmetric synthesis of these axially chiral molecules. In this instance, we disclose an N-heterocyclic carbene (NHC)-catalyzed synthesis of axially chiral diaryl ethers via atroposelective esterification of dialdehyde-containing diaryl ethers. NHC desymmetrization produces axially chiral diaryl ether atropisomers with high yields and enantioselectivities in moderate circumstances. Chiral diaryl ether compounds may be precursors for highly functionalized diaryl ethers with bioactivity and chiral ligands for asymmetric catalysis.

Solvent-Switchable Remote C-H Activation via 1,4-Palladium Migration Enables Site-Selective C-P Bond Formation: A Tool for the Synthesis of P-Chiral Phosphinyl Imidazoles.

Solvent-switchable and site-selective phosphorylation of imidazoles at the C2 or C5 position of the imidazole ring was achieved via 1,4-palladium migration. P-Chiral tert-butyl(aryl)phosphine oxides were cross-coupled to 1-(2-bromophenyl)-1H-imidazoles with high enantiospecificity, thereby leading to a novel class of chiral imidazole-based phosphine oxides. As proof of concept, reduction of an analogue yielded the corresponding P-chiral 2-phosphinyl imidazole ligand, which was shown to induce high enantioselectivity in the formation of axially chiral molecules synthesized via Pd-catalyzed Suzuki-Miyaura cross-coupling.

Achiral Solvent Inversed Helical Pathway and Cosolvent Controlled Excited-State "Majority Rule" in Enantiomeric Dansulfonamide Assemblies.

Achiral solvents are commonly utilized to induce the self-assembly of chiral molecules. This study demonstrates that achiral solvents can trigger helicity inversion in the assemblies of dansyl amphiphiles and control the excited-state "majority rule" in assemblies composed of pure enantiomers, through variation of the cosolvent ratio. Specifically, enantiomers of dansyl amphiphiles self-assemble into helical structures with opposite handedness in methanol (MeOH) and acetonitrile (MeCN), together with inversed circular dichroism and circularly polarized luminescence (CPL) signals. When a mixture of MeOH and MeCN is employed, the achiral cosolvents collectively affect the CPL of the assemblies in a way similar to that of "mixed enantiomers". The dominant cosolvent governs the CPL signal. As the cosolvent composition shifts from pure MeCN to MeOH, the CPL signals undergo a significant inversion and amplification, with two maxima observed at ≈20% MeOH and 20% MeCN. This study deepens the comprehension of how achiral solvents modulate helical nanostructures and their excited-state chiroptical properties.

Electric Field Gradient in Chiral and Tetrahedral Molecules within High-Order LRESC Formalism.

In this work, we present the electric field gradient (EFG) given by the linear response elimination of the small component (LRESC) scheme up to the 1/c4 order (c is the speed of light in vacuum) in CHFClX (X = Br, I, At) chiral molecules, together with CHF2Br and CH2FX (X = Br, I, At) tetrahedral systems. The former could be good candidates for further parity violation studies, especially when heavy atoms are surrounding. In this context, the LRESC scheme demonstrates effective applicability to large tetrahedral and chiral molecules that incorporate heavy elements, with relativistic effects playing a crucial role. The LRESC results of EFG exhibit an excellent agreement with those calculated at the four-component level, giving differences of only hundredths order in a.u. (atomic units) for the bromine nucleus and less than 0.1 a.u. for the iodine nucleus. Regarding the other nuclei, for the chiral molecules, there is a heavy atom effect on the light atom (HALA) for chlorine and fluorine atoms as the substituent halogen atom becomes heavier. Furthermore, the electronic part of the EFG for the central carbon and the fluorine nuclei presents an important dependence with the environment in the molecules under study. With accurate calculations of the EFG and tabulated nuclear quadrupole moment, the nuclear quadrupole coupling constant is obtained within the LRESC scheme, including for the first time correlation effects on the spin-dependent corrections with this methodology, providing results close to the experimental ones for Cl, Br, and I atoms. At the Hartree-Fock level, the differences are around 6% for Br and I nuclei, and at the density functional theory level with the LDA and PBE0 functionals, the differences are no more than 2%.

Recent advances in catalytic asymmetric synthesis

Asymmetric catalysis stands at the forefront of modern chemistry, serving as a cornerstone for the efficient creation of enantiopure chiral molecules characterized by their high selectivity. In this review, we delve into the realm of asymmetric catalytic reactions, which spans various methodologies, each contributing to the broader landscape of the enantioselective synthesis of chiral molecules. Transition metals play a central role as catalysts for a wide range of transformations with chiral ligands such as phosphines, N-heterocyclic carbenes (NHCs), etc., facilitating the formation of chiral C-C and C-X bonds, enabling precise control over stereochemistry. Enantioselective photocatalytic reactions leverage the power of light as a driving force for the synthesis of chiral molecules. Asymmetric electrocatalysis has emerged as a sustainable approach, being both atom-efficient and environmentally friendly, while offering a versatile toolkit for enantioselective reductions and oxidations. Biocatalysis relies on nature’s most efficient catalysts, i.e., enzymes, to provide exquisite selectivity, as well as a high tolerance for diverse functional groups under mild conditions. Thus, enzymatic optical resolution, kinetic resolution and dynamic kinetic resolution have revolutionized the production of enantiopure compounds. Enantioselective organocatalysis uses metal-free organocatalysts, consisting of modular chiral phosphorus, sulfur and nitrogen components, facilitating remarkably efficient and diverse enantioselective transformations. Additionally, unlocking traditionally unreactive C-H bonds through selective functionalization has expanded the arsenal of catalytic asymmetric synthesis, enabling the efficient and atom-economical construction of enantiopure chiral molecules. Incorporating flow chemistry into asymmetric catalysis has been transformative, as continuous flow systems provide precise control over reaction conditions, enhancing the efficiency and facilitating optimization. Researchers are increasingly adopting hybrid approaches that combine multiple strategies synergistically to tackle complex synthetic challenges. This convergence holds great promise, propelling the field of asymmetric catalysis forward and facilitating the efficient construction of complex molecules in enantiopure form. As these methodologies evolve and complement one another, they push the boundaries of what can be accomplished in catalytic asymmetric synthesis, leading to the discovery of novel, highly selective transformations which may lead to groundbreaking applications across various industries.

Dyakonov surface waves in dielectric crystals with negative anisotropy

Abstract Since the initial discovery of Dyakonov surface waves at a flat infinite interface of two dielectrics, at least one of which is positively anisotropic, extensive research has been conducted towards their theoretical and experimental studies in materials with positive anisotropy. The potential applications of these waves were initially limited due to the stringent conditions for their existence and the requirement for position anisotropy. In our study, we present the theoretical prediction and experimental observation of a novel type of Dyakonov surface waves that propagate along the flat strip of the interface between two dielectrics with negative anisotropy. We demonstrate that the conditions for surface waves are satisfied for negatively anisotropic dielectrics owing to the specific boundaries of the strip waveguide confined between two metallic plates. We study such modes theoretically by using the perturbation theory in the approximation of weak anisotropy and demonstrate that the electromagnetic field distribution in these modes is chiral. Experimental verification of theoretical predictions is made in the microwave range using 3D-printed negatively anisotropic water-dielectric metamaterial slabs. The existence of Dyakonov surface waves in negative crystals prompts a reassessment of the list of materials suitable for practical realization of these waves in the visible and infrared ranges. Due to the ability of the considered modes to transmit chiral light, they have potential in the sensing of chiral organic molecules.

Design, synthesis and Anti-PVY activity of planar chiral thiourea derivatives incorporated with [2.2]Paracyclophane.

Potato virus Y (PVY) is a prominent representative of plant viruses. It can inflict severe damage upon Solanaceae plants, leading to global dissemination and substantial economic losses. To discover new antiviral agents, a class of planar chiral thiourea molecules through the key step of N-heterocyclic carbene-catalyzed nitrile formation reaction was synthesized with excellent optical purities for antiviral evaluations against plant virus PVY. The absolute configurations of the planar chiral compounds exhibited obvious distinctions in the anti-PVY activities. Notability, compound (S)-4u exhibited remarkable curative activities against PVY, with a half maximal effective concentration (EC50) of 349.3 μg mL-1, which was lower than that of the ningnanmycin (NNM) (EC50 = 400.8 μg mL-1). Additionally, The EC50 value for the protective effects of (S)-4u was 146.2 μg mL-1, which was superior to that of NNM (276.4 μg mL-1). Furthermore, the mechanism-of-action of enantiomers of planar chiral compound 4u was investigated through molecular docking, defensive enzyme activity tests and chlorophyll content tests. Biological mechanism studies have demonstrated that the configuration of planar chiral target compounds plays a crucial role in the molecular interaction with PVY-CP, enhancing the activity of defense enzymes and affecting chlorophyll content. The current study has provided significant insights into the roles played by planar chiralities in plant protection against viruses. This paves the way for the development of novel green pesticides bearing planar chiralities with excellent optical purities. © 2024 Society of Chemical Industry.

BINOL‐based Chiral Macrocycles and Cages

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1´‐binaphthyl‐2,2´‐diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

BINOL-based Chiral Macrocycles and Cages.

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1´-binaphthyl-2,2´-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

Circular Polarization-Resolved Raman Optical Activity: A Perspective on Chiral Spectroscopies of Vibrational States.

Circular polarization-resolved Raman scattering methods include Raman optical activity (ROA) and its derivative─surface-enhanced Raman optical activity (SEROA). These spectroscopic modalities are rapidly developing due to their high information content, stand-off capabilities, and rapid development of Raman-active chiral nanostructures. These methods enable a direct readout of the vibrational energy levels of chiral molecules, crystals, and nanostructured materials, making it possible to study complex interactions and the dynamic interfaces between them. They were shown to be particularly valuable for nano- and biotechnological fields encompassing complex particles with nanoscale chirality that combine strong scattering and intense polarization rotation. This perspective dives into recent advancements in ROA and SEROA, their distinction from surface-enhanced Raman scattering, and the potential of these information-rich label-free spectroscopies for the detection of chiral biomolecules.

Stable Axially Chiral Cyclohexylidenes from Catalytic Asymmetric Knoevenagel Condensation.

Axially chiral cycloalkylidenes are interesting but less developedaxially chiral molecules. Here, a bispidine-based chiral amine catalytic system was developed to promote efficiently the asymmetric Knoevenagel condensation ofN-protected oxindoles and benzofuranones with 4-substituted cyclohexanones. A variety of alkylidenecycloalkanes with stable axial chirality were obtained in good yields with high er. Based on the absolute configuration determination of product and DFT calculations, a possible mechanism of stereoselective induction was proposed.

PH Modulation of Super-Assembled Heteromembranes for Sustainable Chiral Sensing.

Enantioselective sensing and separation represent formidable challenges across a diverse range of scientific domains. The advent of hybrid chiral membranes offers a promising avenue to address these challenges, capitalizing on their unique characteristics, including their heterogeneous structure, porosity, and abundance of chiral surfaces. However, the prevailing fabrication methods typically involve the initial preparation of achiral porous membranes followed by subsequent modification with chiral molecules, limiting their synthesis flexibility and controllability. Moreover, existing chiral membranes struggle to achieve coupled-accelerated enantioseparation (CAE). Here, we report a replacement strategy to controllably produce mesoscale and chiral silica-carbon (MCSC) hybrid membranes that comprise chiral pores by interfacial superassembly on a macroporous alumina (AAO) membrane, in which both ion- and enantiomers can be effectively and selectively transported across the membrane. As a result, the heterostructured hybrid membrane (MCSC/AAO) exhibits enhanced selectivity for cations and enantiomers of amino acids, achieving CAE for amino acids with an isoelectric point (pI) exceeding 7. Interestingly, the MCSC/AAO system demonstrates enhanced pH-sensitive enantioseparation compared to chiral mesoporous silica/AAO (CMS/AAO) with significant improvements of 78.14, 65.37, and 14.29% in the separation efficiency, separation factor, and permeate flux, respectively. This work promises to advance the synthesis of two or more component-integrated chiral nanochannels with multifunctional properties and allows a better understanding of the origins of the homochiral hybrid membranes.

Chiral Arginine Modified Electrospun Membrane for Enhancing Tendon Healing

AbstractTendon injury is a common motor system disease, impairing joint mobility, and lowering quality of life. Once damaged, tendon has a limited capacity for regeneration. Clinically, available therapeutic strategies have not achieved satisfactory outcomes. Chiral biomaterials can effectively regulate cell behaviors and tissue healing, but have not been applied to injured tendon yet. Here, chiral arginine is attached to electrospun membrane to fabricate chiral scaffolds. L‐chiral scaffold, rather than D‐chiral or R‐chiral scaffold, promotes cell adhesion, proliferation, and tenogenic differentiation. The vinculin/FAK/YAP pathway is discovered to have a significant impact on the processes mentioned above. Additionally, L‐arginine efficiently eliminates reactive oxygen species (ROS) and generates nitric oxide (NO), safeguarding tendon stem/progenitor cells (TSPCs) against oxidative stress. The use of L‐chiral scaffold in a rat model of Achilles tendon injury increases the expression of markers related to tendons and the deposition of collagen. Moreover, L‐chiral scaffold improves tendon structural, functional, and mechanical properties. This L‐chiral scaffold comprehensively enhances tendon healing, providing a promising therapeutic strategy for tendon injury. As a simple and effective method, modification by chiral molecules enriches biomaterial functions and offers a novel option for tissue regeneration.

Controlling Chirogenic Effects in Porphyrin Based Supramolecular Systems: Theoretical Analysis Versus Experimental Observations.

Electronic circular dichroism (ECD) spectroscopy is a widely employed method for studying chiral analysis, requiring the presence of a chromophore close to a chiral centre. Porphyrinoids are found to be one of the best chromophoric systems serving for this purpose and enabling the application of ECD spectroscopy for chirality determination across diverse classes of organic compounds. Consequently, it is crucial to understand the induction mechanisms of ECD in the porphyrin-based complexes. The present study explores systematically the influence of secondary chromophores, bonded to an achiral zinc porphyrin or to chiral guest molecules, on the B-region of ECD spectra using the time-dependent density functional theory (TD-DFT) calculations. The study analyses the impact of change in both the conformation of achiral porphyrin (host) and change in position and conformation of chiral organic molecule (guest) on the B-band of ECD spectra (energy, intensity, sign of Cotton effect). Finally, conclusions made on model complexes are applied to published experimental data, contributing to a deeper understanding of various factors influencing ECD spectra in chiral systems. In addition, a computer program aimed to help rationalise ECD spectra by visualizing corresponding orbital energies, rotatory strengths, electric and magnetic transition moments, and angles between them, is presented.

Search for Chirality in Hydrogenated Magnesium Nanosilicates: A DFT and TD-DFT Investigation.

The formation of silicate grains in the interstellar medium (ISM), especially those containing chiral surfaces such as clinopyroxenes, is poorly understood. Moreover, silicate interactions with various forms of hydrogen-proton (H+), neutral H (HI), and molecular hydrogen (H2) are of high importance as hydrogen comprises >90% of the ISM gas budget, and these species play important roles in the formation of new molecules in space. Furthermore, silicate surfaces catalyze the formation of H2 in the interstellar medium formed on dust grain surfaces by H-H association. The technical difficulty of in situ laboratory investigations of nanosilicate nucleation using astrophysically relevant environmental conditions makes computational chemistry a useful tool for studying potential nanosilicate structures. Furthermore, chiral surfaces interacting with chiral organic molecules could serve as templates that lead to the enantiomeric excess of l-amino acids and d-polyols detected in carbonaceous meteorites. However, in order for this effect to take place, an excess of one chiral form of a mineral is required to break the symmetry. This symmetry-breaking event could have been due to the asymmetric absorption of circularly polarized light by the nanosilicate as it traverses star-forming regions. We investigate this possibility using a metastable chiral form of an enstatite dimer as an input for density functional theory (DFT) and time-dependent (TD)-DFT calculations to obtain various properties and circular dichroism spectra. All in all, twenty-six magnesium nanosilicate structures were studied using varying degrees of hydrogenation: none, with HI, with H+, and with H2. The HSE06/aug-cc-pVQZ level of theory was used for the DFT calculations. TD-DFT calculations utilized the CAM-B3LYP/cc-pVQZ and ωB97X-D3/cc-pVQZ functional and basic set pairings. Results show that (1) all twenty-six structures have absorption bands that fall within the 0.6-28.3 μm range available with the newly launched James Webb Space Telescope and (2) there is a small enantioselective effect by UV-CPL on the eight chiral enstatite dimers (predicted g-values of up to 0.007). While the observed effect is small, it opens up the possibility that it is the inorganic material that becomes enantiomerically biased by UV-CPL, driving chiral enhancements in meteoric organic molecules.

Asymmetric Synthesis of Dihydropyrimidinethione Podand in the Presence of C2‐Symmetric Bis(Hydroxy)Proline‐Containing Amides

AbstractA stereoselective Biginelli reaction involving a CH‐active podand, thiourea, and benzaldehyde was carried out using C2‐symmetric bis(hydroxy)proline‐containing amides as chiral inducers. The target dihydropyrimidinethione‐containing podand was obtained with an enantiomeric excess of 65–75 % and a yield of 58 % under mild conditions. It was established that in the process of asymmetric induction the value of ee depended on the presence of OH group in the proline fragment and of the linker structure in the chiral inducer molecule, in particular, on the presence of asymmetric carbon atoms and the movability of the single bond between them in the linker itself. Based on experimental data, one of the probable reaction mechanisms confirming the special role of the L‐proline or trans‐4‐hydroxyproline fragments in asymmetric induction has been proposed. The developed technique for obtaining an active tuberculostatic agent expands the possibilities for using C2‐symmetric chiral inducers in asymmetric catalysis and is of interest for the synthesis of enantiomerically pure compounds of similar structure.

Chirality-Induced Spin Selectivity in Composite Materials: A Device Perspective.

ConspectusMagnetism is an area of immense fundamental and technological importance. At the atomic level, magnetism originates from electron "spin". The field of nanospintronics (or nanoscale spin-based electronics) aims to control spins in nanoscale systems, which has resulted in astronomical improvement in data storage and magnetic field sensing technologies over the past few decades, recognized by the 2007 Nobel Prize in Physics. Spins in nanoscale solid-state devices can also act as quantum bits or qubits for emerging quantum technologies, such as quantum computing and quantum sensing.Due to the fundamental connection between magnetism and spins, ferromagnets play a key role in many solid-state spintronic devices. This is because at the Fermi level, electron density of states is spin-polarized, which permits ferromagnets to act as electrical injectors and detectors of spins. Ferromagnets, however, have limitations in terms of low spin polarization at the Fermi level, stray magnetic fields, crosstalk, and thermal instability at the nanoscale. Therefore, new physics and new materials are needed to propel spintronic and quantum device technologies to the true atomic limit. Emerging new phenomena such as chirality induced spin selectivity or CISS, in which an intriguing correlation between carrier spin and medium chirality is observed, could therefore be instrumental in nanospintronics. This effect could allow molecular-scale, chirality controlled spin injection and detection without the need for any ferromagnet, thus opening a fundamentally new direction for device spintronics.While CISS finds a myriad of applications in diverse areas such as chiral separation, recognition, detection, and asymmetric catalysis, in this focused Account, we exclusively review spintronic device results of this effect due to its immense potential for future spintronics. The first generation of CISS-based spintronic devices have primarily used chiral bioorganic molecules; however, many practical limitations of these materials have also been identified. Therefore, our discussion revolves around the family of chiral composite materials, which may emerge as an ideal platform for CISS due to their ability to assimilate various desirable material properties on a single platform. This class of materials has been extensively studied by the organic chemistry community in the past decades, and we discuss the various chirality transfer mechanisms that have been identified, which play a central role in CISS. Next, we discuss CISS device studies performed on some of these chiral composite materials. Emphasis is given to the family of chiral organic-carbon allotrope composites, which have been extensively studied by the authors of this Account over the past several years. Interestingly, due to the presence of multiple materials, CISS signals from hybrid chiral systems sometimes differ from those observed in purely chiral systems. Given the sheer diversity of chiral composite materials, CISS device studies so far have been limited to only a few varieties, and this Account is expected to draw increased attention to the family of chiral composites and motivate further studies of their CISS applications.

π-π+ Interaction Promoting the Absorption of Electroactive Chiral Selectors into the Cavity of Conductive Covalent Organic Framework for Enantioselective Sensing of Electrochemically Silent Molecules.

To date, achieving enantioselective electroanalysis for electrochemically silent chiral molecules is still highly desired. Here, an ionic covalent organic framework (COF) consisting of the pyridinium cation was derived from the tripyridinium Zincke salt and 1,4-phenylenediamine in a one-pot reaction. The electrochemical measurements revealed that the ionic backbone contributed to the electron transfer with a low charge transfer resistance. Besides, the π-π+ interaction between the pyridinium cation and ferrocenyl unit can promote the absorption of electroactive chiral ferrocenyl reagents into the hole of COF, so as to afford the electrochemical signals by themselves, replacing the testing enantiomers. As a result, the electroactive complex used as an electrochemical platform was highly effective at enantiomerically recognizing amino alcohols (prolinol, valinol, leucinol, and alaninol) and amino acids (methionine, serine, and penicillamine), giving the ratios of current intensity between l- and d-enantiomers in the range of 1.46-1.72. Moreover, the density functional theory calculations determined the possible intermolecular interactions between the testing enantiomers and chiral selector: namely, hydrogen bonds and electrostatic attractions. Overall, the present work offers an effective strategy to enlarge the electrochemical scope for chiral recognition based on electroactive chiral COFs.

Supramolecular Chirality Achieved by Assembly of Small π-Molecules of Octahydrobinaphtols with Axial Chirality.

5,5',6,6',7,7',8,8'-Octahydro-1,1'-bi-2-naphthol (hbNaph) is an axially chiral molecule consisting of a smaller π-electronic system than that for 1,1'-bi-2-naphthol (BINOL). The absorption and circular dichroism (CD) bands of hbNaph appear in a shorter wavelength region below 310 nm, compared to those of BINOL, and its fluorescence is in the invisible UV region. However, increasing the concentration of hbNaph in solution up to 0.1 M results in its absorption edge gradually extending to longer wavelength, with a shoulder around 330 nm, and finally increasing to about 450 nm. At the same time, blue fluorescence is clearly observed, as well as a new CD band with the sign of the Cotton signals reversed from those obtained for dilute solutions. These results suggest that, at high concentrations, hbNaph forms chiral aggregates, in which π-electrons are delocalized over multiple molecules. To further understand how molecular axial chirality is transformed to supramolecular chirality, we attempted to construct aggregate models by simulating CD spectra using a time-dependent density functional theory. The only reasonable model obtained was that involving the counterclockwise R-enantiomer forming a clockwise helix, while the clockwise S-enantiomer forms a counterclockwise helix. We conclude, however, that, for such helixes, the most plausible model is densely packed and forms when the dihedral angle between the two phenol rings of hbNaph is acute, at around 75°, which reproduces the aggregate-induced CD sign inversion.

Nickel-catalysed enantioselective alkene dicarbofunctionalization enabled by photochemical aliphatic C–H bond activation

AbstractThe development of novel strategies to rapidly construct complex chiral molecules from readily available feedstocks is a long-term pursuit in the chemistry community. Radical-mediated alkene difunctionalizations represent an excellent platform towards this goal. However, asymmetric versions remain highly challenging, and more importantly, examples featuring simple hydrocarbons as reaction partners are elusive. Here we report an asymmetric three-component alkene dicarbofunctionalization capitalizing on the direct activation of C(sp3)–H bonds through the combination of photocatalysed hydrogen atom transfer and nickel catalysis. This protocol provides an efficient platform for installing two vicinal carbon–carbon bonds across alkenes in an atom-economic fashion, providing a wide array of high-value chiral α-aryl/alkenyl carbonyls and phosphonates, as well as 1,1-diarylalkanes from ubiquitous alkane, ether and alcohol feedstocks. This method exhibits operational simplicity, broad substrate scope and excellent regioselectivity, chemoselectivity and enantioselectivity. The compatibility with bioactive motifs and expedient synthesis of pharmaceutically relevant molecules highlight the synthetic potential of this protocol.